Caustic Calcined Magnesite Kiln
CCM kiln engineering expert
As a professional manufacturer of high-temperature kilns integrating design and research and development, equipment manufacturing, installation and commissioning, and technical services, AGICO CEMENT is committed to providing customers with cost-effective and customized solutions for caustic calcined magnesite(CCM) kilns.
Kiln engineering solution for CCM
Caustic calcined magnesite (CCM) is mainly produced by calcining magnesite at a medium temperature (800~1000℃). Its products are widely used in the chemical industry, building materials, welding rods, environmental protection, medicine, rubber filler, and other fields. This process places high demands on the thermal efficiency, calcination temperature control, energy consumption cost, and automation level of the kiln type. Based on different production capacity requirements and raw material forms (lump ore, powder ore), we provide customers with various kiln types to choose from, which we will introduce to you one by one below.






We mainly promote the following mature kiln types in the field of caustic calcined magnesite, and can make personalized customization according to the customer’s on-site conditions.

Vertical Shaft Kiln
Applicable materials: Blocky magnesite (20-60mm)
Recommended production capacity: 3,000-100,000 tons per year
Technical features:
- The kiln has a compact structure and occupies a small area;
- High thermal efficiency;
- Suitable for low-volatile fuels such as anthracite, coke powder, etc.;
- Low investment cost, suitable for small and medium-sized enterprises;
- Configurable PLC control system to achieve automatic temperature control and air volume adjustment;
- Typical fuels: coal gas, natural gas, coal powder, etc.
Applicable customer types: users who strictly control operating costs and mainly use lump ore as raw materials.

Rotary Kiln
Applicable materials: lump ore, pellet ore, pelletizing material, etc.
Recommended production capacity: 20,000~150,000 tons per year
Technical features:
- Uniform calcination temperature, precise control, good activity;
- Strong raw material adaptability, can handle powdered magnesite;
- Integrated design of combustion, cooling and dust removal;
- High automation, optional DCS centralized control system;
- Supports tail gas waste heat recovery system design.
Applicable customer types: Enterprises with high requirements for product activity and quality.

Double Shaft Kiln
Applicable materials: large-size lump ore (>40mm).
Recommended production capacity: 50,000~150,000 tons per year
Technical features:
- Alternate calcination and ventilation, higher efficiency;
- Better thermal efficiency, energy consumption as low as 0.7GJ/t;
- Good environmental performance;
- High whiteness and high activity of finished products;
- Dual burner distribution, more precise temperature control;
Applicable customer types: large enterprises that focus on environmental protection, energy consumption.
| Kiln Type | Raw Material | Heat Efficiency | Cost | Automation | Environmental Adaptability | Production Capacity Range |
| Shaft kiln | lump ore | Medium to high (~60%) | Low | Medium | General | 3000~100000t |
| Rotary kiln | Lump ore/fine ore | Medium (~50%)) | Medium | High | Qualified | 20000~150000t |
| Double shaft kiln | Lump ore (>40mm) | High(~70%) | high | High | Superior | 50000~150000 t |
moderate investment
short return period
extensive market
mature industrial chain
full spare parts supply
Advantages of AGICO CEMENT
Strong customized design capabilities
We have a thermal design team of more than 10 senior engineers, who can tailor kiln system solutions based on raw material characters, production capacity requirements, location, fuel resources and other parameters, including the comprehensive integration of calcination section, cooling section, dust removal system, automatic control, waste heat utilization and other modules.

Mature manufacturing and installation system
All equipment components are processed and manufactured by our own factory, with supporting CNC cutting, plasma welding, large-scale plate rolling, dynamic balancing, spraying and other processes to ensure product accuracy and strength. We have an experienced installation team with overseas engineering project experience and can provide “turnkey” engineering services.

Strong automation and intelligent support
We have cooperated with many domestic automation system companies to independently develop a PLC+SCADA control system suitable for caustic calcined magnesia kilns, which can achieve: Traceable production process and data visualization. Real-time monitoring and automatic adjustment of kiln temperature; Accurate control of air volume and fuel.

Rich experience and customer cases
Our company has served more than 100 customers in the caustic calcined magnesite, cement, lime and other industry. Each project has undergone detailed on-site inspections and multiple rounds of program optimization to ensure good implementation results.

engineering service
A leading EPC contractor for kilns in China






























