cement plant kiln
One-stop service for clinker production equipment
cement rotary kiln
vertical cement kiln
cement kiln upgrade
As an engineering general contractor with over 20 years of experience in cement plant equipment manufacturing, we are well aware of the huge differences in resources, fuels, and environmental policies in the global cement market. Therefore, the suitable type of cement plant kiln must also be tailored to local conditions. We offer two major technical routes:
- Cement rotary kiln system: oriented towards high-quality clinker and energy-saving emission reduction market
- Mechanical shaft kiln system: for small and medium-sized markets and special resource conditions
Through thousands of working condition simulations and global project experience accumulation, we have formed a mature engineering database that can customize process parameters and equipment solutions based on customer raw fuel assay data.
AGICO CEMENT can provide customers with a one-stop solution from process design, equipment manufacturing, project construction, upgrading and renovation to maintenance services. We focus on improving production and clinker quality, reducing energy consumption and emissions, adapting to different raw materials and environmental policy requirements, and helping cement plants achieve long-term stable production and green operation.


Whatever the constraints, we provide the best solution and customized engineering services.
solution1: cement rotary kiln
Core equipment for efficient, energy-saving clinker production
Modern cement production revolves around gas-solid separation, efficient heat exchange, and precise combustion control. Our pre decomposition rotary kiln system consists of the following structural components:
- 6-stage preheater
- high-efficiency decomposition furnace
- low resistance rotary kiln host
- third-generation grate cooler
Based on aerodynamics, achieve the optimal reaction path of clinker in different temperature zones: Powder dehydration → carbonate decomposition → mineral phase formation → rapid cooling crystal solidification
key technology of cement rotary kiln
Complete decomposition system: refinement of mineral reaction control
Our CFD (Computational Fluid Dynamics) model enables precise and controllable temperature distribution at the gas-solid interface. Direct result: More stable strength, denser appearance of clinker, and lower residual free calcium oxide.
Optimization combustion technology for gas-solid flow field
We use a large two air swirl burner with short and concentrated flames for more complete combustion:
- Coal consumption can be reduced to: ≥ 720 kcal/kg clinker
- Reduce NOx generation by 20-45%
- Suitable for high content alternative fuels (RDF, waste oil, industrial solid waste)
Structural and stress optimization of rotary kiln barrel
Adopting a multi-stage variable diameter and thickness gradient design, the cylinder:
- Increased flexural stiffness by ≥ 12%
- Roundness remains more stable
- More uniform distribution of force on support points
Efficient grate cooler
Adopting a lateral propulsion+graded cooling structure:
The clinker temperature of the grate cooler is ≤ 65 ℃+ambient temperature
- Heat recovery efficiency ≥ 70%
- Decreased overburning rate
- Stable crystal structure and 8-12% increase in strength of clinker
solution2: Vertical Cement Kiln
Economic clinker equipment for small and medium-sized projects
We provide a mechanized and energy-saving optimized shaft kiln system, with the airflow and column behavior inside the kiln as the control core. By optimizing the gas porosity of the cylinder, the efficiency of carbonate decomposition is improved, and the environment for clinker mineral phase generation is controlled by zone combustion.
Preheating shaft kiln
Newly added preheating cylinder structure, the granular material has been fully dehydrated and decomposed before entering the calcination zone. Suitable for local markets, remote areas, and fuel stable regions.
Annular Shaft Kiln
- Separation of heat exchange area and calcination area
- Filling and cooling of clinker, utilization of the heat recovery part
- The quality of clinker can meet the requirements of the ordinary CEM II market
choose your cement plant kiln now!
| Category | Applicable Capacity | Clinker Quality | Energy Efficiency | Environmental Performance | Automation Level | Capital Investment | Typical Applications |
| Rotary Kiln | 1000–10000 t/d | ★★★★☆ | ★★★★★ | ★★★★★ | ★★★★★ | ★★★☆☆ | Large-scale plants, cement export, strict environmental compliance |
| Preheater Shaft Kiln | 300–800 t/d | ★★★☆☆ | ★★★☆☆ | ★★★☆☆ | ★★★☆☆ | ★★★★☆ | Small-to-medium markets, areas with limited resources |
| Annular Shaft Kiln | 200–600 t/d | ★★☆☆☆ | ★★☆☆☆ | ★★☆☆☆ | ★★☆☆☆ | ★★★★★ | Low investment, extensive markets, non-high-grade clinker |
| Energy-Saving Modified Shaft Kiln | 200–800 t/d | ★★★☆☆ | ★★★★☆ | ★★★☆☆ | ★★★☆☆ | ★★★★☆ | Old plant upgrades, environmental retrofit projects |
AGICO CEMENT – Full-cycle cement kiln system supplier
We are one of the earliest enterprises in China to enter the field of cement plant equipment manufacturing, specializing in rotary kilns, shaft kiln systems, other related cement plant equipment, and whole line upgrading and renovation projects for over 20 years. Relying on a strong engineering technology center and equipment manufacturing base, we continue to provide efficient and low-energy clinker manufacturing systems for global cement producers.
Large-scale intelligent manufacturing base
From core structural components to critical control systems, all are independently produced. The factory covers an area of 150000 square meters in the heavy industry manufacturing park, with production equipment including CNC double column vertical lathes, heavy-duty gear hobbing machines, 11m × 20m CNC floor boring and milling machines, automatic welding centers, etc. Capable of delivering over 30 cement kiln systems annually. Ensure product quality meets ISO and CE certifications.








National level engineering team
We have an independent engineering design institute and kiln process experimental platform, with over 300 engineering and technical personnel and 15 senior kiln experts specializing in rotary kiln thermal design. We have also participated in EPC general contracting and process review for multiple overseas large-scale clinker production lines.
Complete technical ecosystem support
We can provide:
- Customization of the burner and waste heat utilization system
- Integrated turnkey project of mining → clinker → grinding
- Collaborative optimization of preheater, decomposition furnace, and cooling machine
- Digital thermal diagnosis platform for the entire factory (capable of remote support for performance improvement)








Global successful landing and certification
- Exported to over 60 countries and regions
- Customer service coverage: core cement markets in Africa, the Middle East, Central Asia, Southeast Asia, South America, etc
- Long-term operating experience of the system: 300000-10000000 t/a clinker production line














